Victron energy BMV-600S Manuel page 7

1.4 Features of the BMV
The BMV is available in 3 models, each of which addresses a different
set of requirements. The supported features of each model are
outlined in the following table.
Comprehensive
monitoring of a single
battery
Basic monitoring of a
second (starter) battery
Use of alternate shunts
Automatic detection of
nominal system voltage.
Suitable for high voltage
systems.
Serial communications
interface (PC-Link).
1.4.1 Starter battery monitoring
In addition to the comprehensive monitoring of the main battery
system, the BMV-602S also provides basic monitoring of a second
voltage input. This is useful for systems such as those with a separate
starter battery. Unless otherwise indicated, all values and settings
described in this manual refer to the main battery system.
1.4.2 Use of alternative shunts
The BMV is supplied with a 500 A/50 mV shunt. For most applications,
this should be suitable; however the BMV can be configured to work
with a wide range of different shunts. Shunts of up to 9999 A, and/or
100 mV can be used.
BMV-600S
•
•
•
•
BMV- BMV-
600HS 602S
•
•
•
•
•
•
•
•
•
•
3