SHUT-DOWN
Close the gas supply and then the shut-off fittings of the connected loads. When the LPG
system is not in use, all valves must remain closed.
Close all free connections in the feed lines of the LPG system tightly with a suitable cap to
prevent gas from flowing out.
MAINTENANCE
Upon proper ASSEMBLY and OPERATION, the product is maintenance-free.
REPLACEMENT
If there is any sign of wear or if the product or parts thereof are damaged, it must be
replaced. When the product has been replaced, observe the steps ASSEMBLY, LEAK
TESTING, and START-UP. To ensure that the installation works faultlessly under normal
operating conditions, it is recommended to replace system parts subject to wear or ageing,
e.g. pressure regulators, hose assemblies, shut-off devices, as required:
Recommendation: replacement times 5 years.
The gasket in the inlet connector (if provided) must be changed every time the cylinder has
been replaced or disassembled. It must also be replaced if it is damaged or the connection is
no longer tight.
DISPOSAL
To protect the environment, our products may not be disposed of along with
household waste.
The product must be disposed of via a local collection station or a recycling station.
TECHNICAL DATA
Maximum admissible pressure
Inlet pressure p
Nominal flow rate Mg
Change over nominal pressure pdi
Nominal regulated pressure
maximum permitted pressure drop in
downstream installation
Ambient temperature
For additional technical data or special settings, see type label of the product!
SERVICE
At the web address www.gok-blog.de you can find answers to frequently asked
questions relating to the topics of LPG systems, liquefied gas for leisure time use,
oil firing installations and tank management.
CERTIFICATE
Our management system is certified according to ISO 9001, ISO 14001 and
ISO 50001, see:
www.gok.de/qualitaets-umwelt-und-energiemanagementsystem.
PS16bar
0.6 to 16bar
1.5kg/h
0.75bar
p
alternatively 30 or 50mbar
d
∆P5
-20°C to +50°C
Caramatic DriveTwo
27 / 44