Design - GOK Caramatic DriveTwo Instructions De Montage Et D'utilisation

Connections could become leaky, if they are contaminated or corrupted
Therefore, the connections must regularly be checked for leak-tightness.
Swap the product where appropriate.
Keep all connections free from contamination, even small amounts of dirt can cause
connections to leak.

DESIGN

horizontal version
Nose indicating the withdrawal
direction on the rotary knob
Rotary knob for the operation of
reserve cylinder
Inlet connections
Outlet connection
Assembly board (elbow)
20 / 44
Screw aid SW 23
Sealing nut with strap on inlet connection
Operation and reserve cylinder display
(GREEN / RED) visual indicator type AUV
Breather for the PRV (without figure)
Test connector with screw cap
Check valve with cap
Green push button on the crash sensor
Caramatic DriveTwo
vertical version