Inappropriate Use; User Qualification; Connections - GOK Caramatic DriveTwo Instructions De Montage Et D'utilisation

INAPPROPRIATE USE

All uses exceeding the concept of intended use:
• e.g. operation using different media, pressures
• use of gases in the liquid phase
• installation against the flow direction
• operation with inappropriate hose assemblies
• changes to the product or parts of the product
• use at ambient temperature varying from: see TECHNICAL DATA
• installation differs from installation position (see page 18)
• operation with rotary knob in intermediate position
•
withdrawal from horizontal gas cylinders
•
operate indoors
• installation in mobile homes and sports boats
• For assembly without operators or users, see USER QUALIFICATION!
• operation of devices while driving which have not been approved for this by the
manufacturer
• operation of cooking devices or ovens while driving
• operation with high pressure hose assemblies without excess flow device SBS
commercial use
•

USER QUALIFICATION

ASSEMBLY, REPLACEMENT
OPERATION, START-UP, MAINTENANCE, SHUT-
DOWN , RESTART, RESTORATION, DISPOSAL,
Leak check
*Experts are particularly those who, on the basis of their training, knowledge and experience
gained during practical activity, guarantee that they carry out the inspection properly.

CONNECTIONS

Inlet,
optional
Outlet,
optional
Connection
Test connection
Gaskets in the connections must not be damaged and be placed correctly in the frame.
Activity
Trading name and dimensions
acc. to standard
Male thread connections
• G.13 = thread M 20 x 1.5
Trading name and dimensions
acc. to standard
Compression fitting RVS
• H.9 = compr. fit 8 or compr. fit 10
Trading name and dimension
Test hose G 1/4 lh nut x adapter for
test device x 750 mm
Caramatic DriveTwo
Qualification
user and operator
qualified personnel, customer service
expert*
Installation notes
Tightening torque:
Coupling nut =
4 to 5 Nm
Installation notes
M11x1-UEM/PV
with female thread
Assembly
information
19 / 44