Mechanical Lowering - Reely 1277092 Notice D'emploi

d) Mechanical Lowering
For lowering the chassis, it is also possible to reduce the
rebound clearance mechanically.
For this, each of the four lower transverse links has a small
grub screw that can be adjusted (1 = front axle, 2 = rear
axle).
1
When the grub screw is turned in further, the transverse
link cannot extend as far anymore; this lowers the chas-
sis.
To keep the chassis from touching down, the shock absor-
bers should be set accordingly harder when lowering
2
46