Publicité
English
Daily Switch-On
!
“Before using the machine make sure that:
the main electricity supply ON/OFF switch is ON;
the water supply and water softener taps are open .”
At the end of the day, turn the machine OFF by turning the main ON/OFF switch (1) to position 0.
Gas installation switch-on (for "G" machines only)
!
" Don’t switch on the gas installation when the
boiler is under pressure ".
Before using the machine check that:
- the main electricity supply ON/OFF switch is ON;
- the main water supply tap is open .
- the gas supply tap is open.
Turn the main switch ON/OFF (1) to position 1.
The machine completes the operations described under “ Daily Switch-
On “.
Press and turn the gas tap knob (4) counter-clockwise and repeatedly
press the piezoelectric switch-on push-button (3) until the burner under
the boiler lights up.
Check through the observation window that the burner is lit and, after a
few seconds, release the knob (4).
“Heating” now begins.
At the end of the day, switch off the machine by turning the ON/OFF switch (1) to the "0" position and close the gas tap (4) by turning it to the
"0" position.
Heating phase
During heating, if one of the coffee dispensing push buttons (16, 17,
19, 20, 21) is pressed, the machine dispenses a coffee at the
temperature reached at the time.
Heating is completed when the boiler gauge indicator (14) remains
stable in the green area.
Delivery of the coffee
Remove the filter holder (10), empty out any coffee grouts and fill it up
with 1 or 2 servings of ground coffee, depending on the filter holder
used.
Press the ground coffee in filter down uniformly, using the grinder/doser
presser.
Remove any residues of ground coffee from the filter rim.
Fit and tighten the filter holder (10) on the coffee dispenser unit, positioning
the cup (or cups) under the nozzle (or nozzles) of the filter holder (10).
Press the coffee dispensing push button (16, 17, 19, 20) for the required
serving; the machine will stop automatically.
Press the push button (21) for continuous dispensing.
Dispensing, whether for dosed servings or in the continuous dispensing
mode, can be interrupted at any time by pressing the STOP push button
(18).
Turn the main switch (1) to position 1.
The boiler is filled until the set level is reached.
Turn the main ON/OFF switch (1) to position 2.
“Heating” now begins.
The machine is now ready to dispense coffee, steam and hot water.
To make sure that the dispenser unit and the filter holder (10) are at
similar temperatures, press the coffee dispensing push button (21) and
let the machine dispense coffee for a few seconds. Then press the
STOP push button (18) to stop dispensing.
19
16
18
English
4
3
21
17
20
10
Publicité
