Geberit Rapid HS01 616.290.00.1 Manuel D'utilisation page 41

2
Press and hold the <FLUSH TIME> button to select the
desired flush time (1 second to 15 minutes). Example: for a
flush time of 4 minutes, press and hold the button for 4
minutes.
✓
Water will flow so long as the button is pressed.
Result
✓
The settings are saved.
✓
The flush interval begins from the point that the settings
are made. The first flush is released once the flush
interval has elapsed.
• The flush time only needs to be set once. The flush time
then applies to all subsequent flushes.
• To reset the flush time, repeat the setting procedure as
outlined above.
• After replacing the battery, repeat the setting procedure
as outlined above.
18014401053566091-1 © 07-2018
967.986.00.0 (01)
EN
41