If the running belt is slipping during use, turn off and unplug the treadmill.
Using the 6 mm Allen Wrench provided, turn both left and right rear roller
adjustment bolts 1/4 turn clockwise, then turn the main power switch back
on and run the treadmill at a speed of 8-10 KPH. Run on to the running belt
to determine if the belt is still slipping. Repeat this procedure until the belt
no longer slips.
OPERATION VIA APP
The device can also be operated via the „FitShow" app. Scan the following QR
code to download the app:
Apple iOS
Android
EN
47