Troubleshooting - CAPITAL SPORTS Pacemaker F60 Mode D'emploi

EN
48

TROUBLESHOOTING

Problem
Treadmill will not start.
Belt slips.
Belt hesitates when
stepped on.
Belt is not centred.
Possible cause
Treadmill not plugged
in.
Safety Tether Key is not
correctly installed.
Circuit breaker in the
house has been tripped.
Treadmill circuit
breaker has been
tripped.
Belt not tight enough.
Not enough lubrication
applied onto the
running deck.
Belt is too tight.
Running belt tension
not even across the
rear roller.
Suggested solution
Plug the power cord
into a wall outlet.
Reinstall the Safety
Tether Key.
Reset the circuit
breaker, or call an
electrician to replace
the circuit breaker.
Wait 5 minutes and
then try to restart the
treadmill.
Adjust belt tension.
Apply lubricant.
Adjust belt tension.
Centre the belt.