Disconnecting; Loading Wav Files From A Computer - Tascam Model 24 Mode D'emploi

10 –Using a computer to transfer data
5.
Click the TASCAM_M drive on the computer to show the
MTR, MUSIC and UTILITY folders.
ATTENTION
i This unit receives power through its power cord. It cannot be
powered by USB.
i Do not disconnect the power cord or turn off the power
during data transfer. Data will be lost if the power is inter-
rupted during transfer. Lost data cannot be restored.
i Do not change the names of folders in TASCAM_M.
NOTE
i Do not change names, delete or otherwise alter individual
files inside the MTR folder.
i The UTILITY folder is used when updating the unit system, for
example.
6.
Press the F1
button to return to the Meter Screen.

Disconnecting

Before disconnecting the USB cable, use the proper procedures
for your computer to unmount the unit (as an external drive).
See the computer's operation manual for instructions about
how to unmount an external volume.
Press the F1 button to disconnect from the computer and
return to the Home Screen.
50
TASCAM Model 24

Loading WAV files from a computer

1.
Use a USB cable (Type-A to Type-B) to connect the comput-
er to this unit's USB port. (See "Connecting with a Comput-
er" on page 49)
2.
Click the "Model 24" drive on the computer to show the
MTR, MUSIC and UTILITY folders.
3.
Drag and drop files on the computer that you want to trans-
fer to the unit to the MUSIC folder.
ATTENTION
i The UTILITY folder is used when updating the unit system, for
example.
i Do not change names, delete or otherwise alter individual
files inside the MTR folder. Doing so could prevent loading
data as a song and make proper recording and playback
operations impossible.
TIP
i You can manage the content of MTR or MUSIC folders from
the computer.
i You can create subfolders in the MUSIC folder up to the
second level for use with this unit. The Model 24 cannot
recognize sub-folders and files located at the third layer level
or below.