Barbecook CARLO Mode D'emploi page 8

9T 9T ROUBLESHOOTING
Problem
Fan does not work properly
Metal component deformed
Flames in the charcoal
container
8
Probable cause(s)S
• Batteries almost empty or inserted incorrectly
• Fan is damaged
• Fan is stuck
• Control knob set to a too low position
heat
•
• Food too greasy
www.barbecook.com
olution(s)
• Replace batteries or re-insert batteries
• Order new fan. See "7.6O rdering spare parts"
• Free the fan
• Set control knob to highest position and
decrease afterwards
Some deformation is normal and does not require
any actions. If the component is deformed too
much, order a spare part. See "7.6O rdering spare
parts".
•
minutes
• Remove excess oil or trim excess fat from your
food