Barbecook CARLO Mode D'emploi page 7

7.3 Storing the appliance
• Store the appliance indoors after each use.
• To extend the lifespan of your appliance, we recommend
putting it in the bag that came with the appliance.
• Make sure the appliance is completely dry before you store
it. This prevents formation of rust.
• Remove the batteries before you store the appliance.
7.4 Disposing batteries
Always dispose used batteries in a safe way, according to the
local prescriptions. Never put used batteries in the garbage.
7.5 Maintaining stainless steel and
powder coated parts
The appliance is composed of stainless steel and powder coated
parts. Each material has to
Material How to maintain this material
• Do not use aggressive, abrasive or metal
Stainless steel
detergents.
• Use soft detergents and let them act on the
steel.
• Use a soft sponge or cloth.
• Rinse thoroughly after cleaning and dry well
before storing.
• Do not use sharp objects. Use soft detergents
Powder
and a soft sponge or cloth.
coated
• Rinse thoroughly after cleaning and dry well
before storing.
To prevent formation of rust on stainless steel, avoid
contact with chlorine, salt and iron. We recommend not
using the appliance near the coast, near railways or near
swimming pools.
Damages caused by not following these instructions are
regarded as inadequate maintenance and are not
covered by the warranty.
Below the exploded view of your appliance (second part of the
of each part, so you can use it to check how you have to maintain
a particular part. The parts list uses the following symbols:
Symbol
Stainless steel
Powder coated
7.6 Ordering spare parts
1
If you registered your appliance online, you will automatically
be guided to the correct list in your MyBarbecook account.
There you have the possibility to order your parts online.
2 Order the spare part via www.barbecook.com or at your point
of sale. Parts under warranty can only be ordered at your point
of sale.
M aterial
www.barbecook.com
8 WARRANTY
8.1 Covered
Your appliance comes with a warranty of two years, starting from
the date of purchase. This warranty covers all manufacturing
defects, provided that:
• You used, assembled and maintained your appliance
according to the instructions in this manual. Damages
caused by misuse, incorrect assembly or inadequate
maintenance are not regarded as manufacturing defects.
• You can present the receipt and the unique serial number of
your appliance. This serial number starts with a letter,
- On this manual.
- On the packaging of the appliance.
- On the bottom of the appliance.
• The Barbecook quality departme
are defective and that they proved defective under normal
use, correct assembly and adequate maintenance.
If one of the above conditions is not met, you cannot claim any
form of contribution. In all cases, the warranty is limited to the
repair or replacement of the defective part(s).
8.2 Not covered
The following damages and defects are not covered by the
warranty:
• Normal wear and tear (rusting, distortion, discolouration...) of
normal to replace these parts from time to time.
• Visual irregularities that are inherent to the manufacturing
process. These irregularities are not regarded as
manufacturing defects.
• All damages caused by inadequate maintenance, incorrect
storage, improper assembly
pre-assembled parts.
• All consequential damages caused by careless or
non-compliant use of the appliance.
•
of aggressive detergents, exposure to chlorine... These
damages are not regarded as manufacturing defects.
7