Kodak STEP Guide De L'utilisateur page 8

Self-Timer
Your camera comes with a ten-second
self-timer. To set it, press the timer button
(located on the top of the camera), then
press the shutter button. The timer button
will blink white while the timer counts down
and in ten seconds, your photo will be
captured.
Adding Effects
Photo Frames
– To add a border to your print, press the
frame button located on top of your
camera.
14 | EN
Filters
– To give your print a sepia or black-and-
white treatment, press the color button
(located on the top of your camera) to
select the color tint for your next print.
Photo Booth
– To take photos with a photo booth effect,
press and hold the shutter button for
three seconds. The timer button will blink
and the camera will take four photos in a
row, capturing a photo every four
seconds. The photos will print on one
sheet with these four consecutive images.
Notes on Battery Usage
Carefully read and strictly observe the safety
instructions and the notes described below:
– Use only the included, non-removable
battery (7.4V).
– Avoid extremely cold environments, as
low temperatures can shorten the battery
life and reduce camera performance.
– When you are using a KODAK
STEP that has not been used for
an extended period of time, it may affect
the battery life and the number of images
that can be captured. To maximize its
battery performance and lifetime, we
recommend that you fully charge the
battery and discharge it for at least one
complete cycle before use.
– Properly dispose of the battery when
disposing of the camera.
– Do not disassemble the camera or
remove the battery at any time. The
battery is not designed to be removed
from the camera, nor charged outside the
camera.
Extended Use
During extended use, your KODAK STEP
EN | 15