Zodiac CADET ROLL UP 200 Manuel Du Propriétaire page 20

The inflation system is composed of:
THE FOOT PUMP
a. connecting tip
b. hose end piece
c. hose base
d. outlet for inflation
THE STANDARD VALVES
(1) cap (2) valve insert
To activate the standard valves into INFLATION
position:
• Free the valve insert from its protection.
• Unscrew the valve cap.
• Screw the valve support onto its base (screw it
tight but without exaggeration, not to deteriorate
the screw thread) and check that the valve cap
stays accessible.
TO DEFLATE:
Unscrew the valve support from its base
THE VALVES « EASY – PUSH ».
To change the position:
Push / Push
INFLATION SYSTEM
(3) base
Inflation position
diaphragm closed, the inner
button springs upwards
1
2
3
diaphragm open, the inner
/ 10
6
a
b
c
d
Deflation position
button goes down