Axis Q1615-E Mk II Mode D'emploi page 21

1
Grounding screw
2 Washer
3
Grounding wire
4
Shoe ring
6. Route the network cable through the cap.
7. Slide the network cable through the slit in the gasket.
8. Route the network cable through the cable gland.
1
Cap
2
Gasket
3
Cable gland
4
Plug (discard)
9. Press the gasket into the cable gland and screw the cap on firmly.
Do the following to attach the camera to the wall bracket:
1. Place the camera with the bottom cover on the wall bracket and tighten the bracket
screws.
2. Replace the cable cover and tighten the screws.
3. Connect the cables. See Connect the Cables on page 22.
AXIS Q1615-E Mk II Network Camera
21
EN