Air Duct - Palazzetti ECOFIRE GINGER Généralités - Avertissements - Installation - Entretien

5.8 AIR DUCT

The stove is supplied with a system that allows
diverting of the hot air out of a possible rear duct.
Using the supplied wrench act on the
adjustment screw that is accessible from the
Turning the screw anti-clockwise, the air will
be diverted through the rear duct (a small part
Turning the screw clockwise, all the hot air will
exit from the upper grids of the stove.
Intermediate positions of adjustment allow
dividing of the air into the two directions.
Warning!
The stove is equipped with a safety device that
prevents ducting the air if it has not been previously
removed during installation.
If you intend to connect the stove to a duct system,
remove the mounting block, removing the coating
Remove the back cap to allow air ducting (Fig. 5.16).
27