Connecting The Titrator - Combination With Accessories And Additional Devices; Back Panel Of The Titrator Titroline; 7500 Kf; Connection Ports Of The Titroline - SI Analytics TitroLine 7500 KF Mode D'emploi

84

2.3 Connecting the Titrator - Combination with Accessories and Additional Devices

2.3.1

Back panel of the titrator TitroLine

1
Fig. 8
2.3.2

Connection ports of the TitroLine

The TitroLine® 7500 KF is equipped with the following connections:
1) µA measurement input for the connection of double platinum electrodes (KF 1100 or Pt 1200, Pt 1400)
2) USB-B interface for connection to a PC
3) On/Off switch
4) Two USB-A ("Master") interfaces for connecting USB devices such as a keyboard, printer, manual control
unit, USB memory device etc.
5) "in": Connection of the external power pack
6) "out": Connection of the TM 235 KF titration stand or TM 235 magnetic stirrer
7) Two RS232 ports, 4-channel (Mini-DIN):
RS1 for connection to the PC
RS2 for connection of a weighing balance and other devices from SI Analytics (burettes a.s.o.)
2.3.3

Connecting a printer

Printers with a USB interface are to be connected to one of the two USB-A interfaces. These printers have to
feature HP PCL emulation (3, 3GUI, 3 enhanced, 5, 5e). So-called GDI printers cannot be used!
Alternatively the thermo-compact printer Seiko S445 can be connected.
2.3.4

Connecting a USB device (manual controller, keyboard, memory device, hub)

The following USB devices can be connected to the USB-A interfaces:
•
PC-keyboard
•
TZ 3880 manual controller (in the following: "mouse")
•
Printer
•
USB storage devices, e.g. USB sticks
•
USB hub
•
USB barcode scanners
Chapter 2. Unpacking and First Operation
®

7500 KF

®
7500 KF
2
3
4
5
6
7