Technical Data Titrator Titroline ® 7500 Kf - SI Analytics TitroLine 7500 KF Mode D'emploi

76
1.2 Technical Data Titrator TitroLine
CE sign:
Country of origin:
The following solvents/titration reagents are allowed to be used:
− All common titration solutions.
− As reagent water and all non-aggressive non-organic and organic fluids are allowed. If using combustible
fluids fire please adhere to the Guidelines for Explosion Protection and Prevention of the chemical industry.
− For fluids with higher viscosity (≥ 5 mm
speed can be adjusted.
− Fluids with viscosity over 20mm
Measurement input:
* The measurement uncertainty of the sensor probe has to be taken into account as well.
Chapter 1 – Specifications Titrator TitroLine
EMC compatibility according to the Council Directive: 2004/108/EG;
applied harmonized standards: EN 61326-1:2006
Low-voltage directive according to the Council Directive 2006/95/EG
Testing basis EN 61 010, Part 1
Germany, Made in Germany
2
/s), lower boiling point or affinity to outgas, the filling and dosage
2
/s cannot be dosed.
Karl-Fischer (Dead-stop) connector for double platinum electrode
Polarisation voltage variably adjustable from 40 ... 220 mV.
Connector: 2 x 4 mm - sockets.
Measurement
range
0 ... 100
I [µA]
®
7500 KF
®
7500 KF
Display resolution
0,1
Status August. 20
Measurement
accuracy* without
sensor probe
0,2 ± 1 Digit
th
2012