Health O Meter Professional 597KL Instructions De L'utilisateur page 9

597KL/599KL ASSEMBLY INSTRUCTIONS (continued)
7. Remove the screw from the back of the
display module, place the module on top of
the pillar and use a Phillips head screw
driver to tighten the module to the pillar with
the screw that was previously removed.
8. Using a Phillips head screwdriver, remove
the 2 screws at the rear bottom of the pillar.
Obtain the AC adapter bracket from the
carton and attach it to the pillar using the 2
screws previously removed. See "Powering
the Scale" on page 13 to insert batteries or
power adapter. Then the scale is ready for
use.
9