Operating Guide; Prepare The Handheld Remote - Petsafe ST-350-LD Manuel D'utilisation

STEP 1

Prepare the Handheld Remote

Charge the Handheld Remote
1. Lift the rubber cover protecting the Handheld Remote
Charging Jack.
2. Connect one of the charger connectors to the
Handheld Remote Charging Jack.
3. Plug the charger into a standard wall outlet.
4. Charge the Handheld Remote for 5 hours for the irst
charge. Recharges take only 3-4 hours. Note: The
Battery Indicator will scroll while charging and will
become solid when fully charged.
5. When charging is completed, replace the rubber cover.
Note: Approximate battery life between charges is 40 to
60 hours, depending on frequency of use.
Turning ON the Handheld Remote
Power up the Handheld Remote by pressing any button. The Digital Display turns on when you
press any button.
10

OPERATING GUIDE

www.petsafe.net