Operating Guide; Locate The Fence Transmitter - Petsafe in-ground fence HIG11-13555 Manuel D'utilisation Et De Dressage

Operating Guide

Step

Locate the Fence Transmitter

1
Place the Fence Transmitter:
• In a dry, well ventilated, protected area (1A, 1B).
• In an area where temperatures do not fall below freezing (e.g., garage, basement, shed, closet).
• Secured to a stationary surface using appropriate mounting hardware (not included). A mounting template is
included in the back of this guide.
• At least 3 feet from large metal objects or appliances as these items may interfere with the signal consistency (1C).
Once you have mounted the Fence Transmitter, the Boundary Wire must exit the building. This can be
accomplished via a window or through a hole drilled through the wall. Ensure the drill path is clear of any
utilities. Make sure the Boundary Wire is not cut off or pinched by a window, door, or garage door,
as this can damage it over time.
To prevent fires and electrical hazards, install the Fence Transmitter in buildings that are in accordance
with state and local electrical codes.
1B 1C
1A
3ft.
www.petsafe.net 7