Operating Guide; Set Up The Transmitter - Petsafe PIF-300-21 Manuel D'utilisation Et De Dressage

Receiver Collar
Receiver
Indicator
Light
Washers
Contact Points
STEP 1

Set Up the Transmitter

Important: You may need to move the Transmitter several times before determining the
fi nal location.
The Transmitter is located at the exact centre of the desired Pet Area. Place the Transmitter:
• On the ground fl oor of your home and at least 60 cm (2 ft) above the fl oor.
• In a dry, well ventilated, protected area.
• In an area where temperatures do not fall below freezing (e.g., garage, basement,
shed, cupboard).
• On a non-metal table or mount on a wall (1A). A mounting template is included on the back of
this guide.
• At least 1 m (3 ft) from large metal objects, as these items may reduce the size and shape of your
Pet Area (1B).
To maximize your Pet Area, make
sure the Boundary Switch is on
"High" and the Boundary Control
Dial is set to "8" (1C). Plug Power
Adapter into Power Jack and
standard outlet. Turn the
Transmitter on.
Transmitter
Battery

OPERATING GUIDE

1A
Wall
Mount
www.petsafe.net
1B
1m
(3ft)
Tabletop
Power Jack
Boundary Switch
Power Light
Boundary Control Dial
On/Off Switch
1C
8
7