Petsafe ST-350-LD Manuel D'utilisation page 18

Handheld Remote Functions for Dog 2 Mode
Dog 1 Tone
Dog 1 Stimulation
Dog 1 +2 Boost
Dog 2 Tone
Dog 2 Stimulation
Dog 2 +2 Boost
Dog 1/Dog 2 Stimulation Levels
To change the Stimulation Level for Dog 1 or Dog 2, press and hold the +2 Boost Button for 5 seconds.
The Dog 1 icon along with it's selected Stimulation Level will appear. You can now use the Upper Right
Button to increase the Stimulation Level for Dog 1 and the Lower Right Button to decrease the Stimulation
Level. Press the +2 Boost Button to lock the Stimulation Level. Now you can adjust the Dog 2 Stimulation
Level using the same method. Press the +2 Boost Button to lock the Stimulation Level and return to normal
2-Dog operation.
Note: To view the currently selected Stimulation Level for Dog 1, press the +2 Boost Button once
and the display will show the Dog 1 symbol along with the selected Stimulation Level.
To view the currently selected Stimulation Level for Dog 2, press the +2 Boost Button twice and the
Digital Display will show the Dog 2 symbol along with the selected Stimulation Level.
To Remove Dog 2 from the Handheld Remote
Press and hold the +2 Boost Button for 5 seconds. Press the Right Lower Button
until the "1d" symbol appears on the Digital Display. Press +2 Boost Button to exit
the menu.
18
Upper Left Button (Green)
Lower Left Button (Yellow)
Press +2 Boost Button (Red) and the Lower Left Button
(Yellow) simultaneously
Upper Right Button (Grey)
Lower Right Button (Grey)
Press +2 Boost Button (Red) and the Lower Right Button
(Grey) simultaneously
www.petsafe.net