Chapter 4. Safety Standards; Warnings; Residual Risks - Minipack-Torre Pratika 56CS Instructions Pour L'installation, L'emploi Et L'entretien

Chapter 4. Safety standards

4.1. Warnings

THE MACHINE CAN NOT BE USED BY UNTRAINED PERSONNEL!
CAUTION!
Smoking is forbidden while the machine is operating!
NEVER performs maintenance and/or adjustments to the machine during operation. Guards may only be
disassembled by suitably trained and qualified maintenance engineers.
NEVER operate the machine without all guards fitted.
Ensure correct position of all guards before resuming normal operation.
NEVER perform maintenance or other operations without disconnecting the power supply.
Before accessing the electrical enclosure, disconnect the power supply by means of the relative main switch.
If it is necessary to leave the machine unattended, switch it off by turning the main switch to the "0"
(OFF) position!

4.2. Residual risks

The machine does not feature high hazard risks; nevertheless the following warnings and precautions must be observed.
Dragging hazard!
Hazard generated by moving elements (conveyor belts, motor driven rollers) in the event of contact during
operation phases.
Burn hazard!
Risk due to hot sealing knives for film.
Before performing operations in these zones, set the machine to "maintenance mode", and wait for
resistances to cool.
Never perform operations without suitable personal protective equipment such as gloves and overalls.
Electric shock hazard!
Risk due to live electrical parts inside electrical enclosure (on main switch terminal boards and terminals on
input to the door interlock).
The wheels must be used only for moving the unit short distances across smooth, horizontal floors.
26
GB