Certification; Registration; Child Fit Information - Britax Emblem Guide D'utilisation

BRITAX Child Safety, Inc.

Certification

This Restraint is Certified For Use in Motor Vehicles and
Aircraft�
Motor Vehicles
This child seat system conforms to all applicable Canadian
Motor Vehicle Safety Standards (CMVSS 213 and 213.1).
Aircraft
This child seat is certified for aircraft use. Most
airlines in the U.S. and Canada will allow the
use of a child seat as long as it is labeled as an
approved child seat for use in aircraft and fits
properly on the aircraft seat. Contact the airline
about their policy prior to traveling.
The FAA recommends that a child weighing up to 18 kg
(40 lbs) use a certified, harnessed child seat while traveling
on an aircraft.
Install your child seat in a window seat to avoid
blocking the aisle� For rear-facing aircraft installation,
see "Rear-Facing Lap Belt Installation" on pages 12-13.
For forward-facing installation, follow "Forward-Facing
Lap Belt Installation" on pages 18.
– If the aircraft lap belt is too short, ask a flight
attendant for a belt extender.
– Your child may experience discomfort if the buckle
is located in the seating area of the child seat after
installation.
– Inflatable aircraft lap belts are NOT compatible with
this child seat.

Registration

Child restraints could be recalled for safety reasons. You
must register this restraint to be reached in a recall. Send
your name, address, e-mail address if available and the
restraint's model number and manufacturing date to Britax
Child Safety, Ltd., P.O. Box 7289, RPO Brunswick Square,
Saint John NB E2L 4S6, or call 1-888-427-4829, or register
online at us.britax.com/registration.
For your convenience, record all the information about your
child seat below. Refer to the Serial Number & Manufactured
Date Label for all information (see page 2).
Model Name and Number: ______________________________
Serial Number: ________________________________________
Batch Number: ________________________________________
Date of Manufacture: ___________________________________
6
EMBLEM/ALLEGIANCE Canadian User Guide

Child Fit Information

Rear Facing: 2�3 – 18 kg (5 – 40 lbs)
The American Academy of Pediatrics recommends that all
infants and toddlers should ride in a Rear-Facing Car Seat
until they are 2 years of age or until they reach the highest
weight or height allowed by their car seat manufacturer.
Britax strongly recommends that children ride rear facing to
the highest weight or height specified.
Use rear facing:
• with harness straps in the closest
position at or below the child's
shoulders and
• with children who weigh 2.3 – 18 kg
(5 – 40 lbs) and
• who are 124.5 cm (49 in.) or less in
height and
• when the top of the child's head is at
least 2.5 cm (1 in.) below the top of
the head restraint/head pad.
The infant positioning pillow must be used to achieve
better fit and support for infants weighing up to 10 kg
(22 lbs) in a rear-facing position� Do not use over 10 kg
(22 lbs) or in a forward-facing position� See page 24�
Forward Facing: 10 – 29�4 kg (22 – 65 lbs) and are able to
walk unassisted
Britax strongly recommends that children should be secured
with a harness system until they exceed the weight or height
limits specified.
Use forward facing:
• with harness straps in the closest
position at or above the child's
shoulders, parallel to level ground and
• with children who weigh 10 – 29.4 kg
(22 – 65 lbs) and
• who are able to walk unassisted and
• who are 124.5 cm (49 in.) or less in
height and
• when the top of the ears are below the top of the head
restraint/head pad.
IMPORTANT: Do not use the infant positioning pillow
with a forward-facing installation.
Shoulder
Level
7