Yamaha YSP-4000 Mode D'emploi page 477

YSP-4000
QUICK REFERENCE GUIDE
This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the
surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner's Manual.
1
Installing this unit
Decide where to install this unit.
Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired
surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner.
Install this unit in the exact center of the wall when it is Install this unit in the corner at a 40˚ to 50˚ angle from the
measured from the left and right corners. adjacent walls.
An object, such as furniture An object, such as furniture
40˚ to 50˚
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
Install this unit using a rack, etc.
Depending on your installation environment, connections with external components (see "2 Connecting external components to this unit") can be done before
installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure must come first.
install this unit on top of a rack, etc., use the supplied fasteners to prevent an accidental fall of this unit.
For further information on installation, see page 17 in the Owner's Manual.
The following is an example of installing this unit in a rack. To prevent this unit or the floor from being scratched, we recommend putting a piece of
cloth on the floor in step 2.
1 2 3
Place this unit in front of Place this unit upside Install this unit in the
the rack. down and connect this unit rack.
to your TV and DVD player.
y Hint
• To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.
• You can also use the optional metal wall bracket (sold separately) to mount this unit on the wall. For details, refer to the instructions
supplied with the metal wall bracket.
Note
Be careful not to leave scratches on this unit or the rack.
Printed in Malaysia WK94420 [En]
2
Connecting external components to this unit
Items used for connections and operations
in this guide
s Audio pin cable (x1)
s OSD* video pin cable (x1)
Connecting external components such as a TV or DVD player to this unit.
s Optical cable (x1)
s Coaxial cable (x1)
Connect your TV or DVD player to this unit using appropriate cables as shown below.
s AC power supply cable (x1)
wall outlet. For further information on connecting other components, see pages 20 to 31 in the Owner's Manual.
s IntelliBeam microphone (x1)
s Cardboard microphone stand (x1)
s Demonstration DVD (x1)
*OSD: On-Screen Display
This connection example shows a way to connect external components such as a TV or DVD player to
Connection
this unit by using the supplied cable.
example 1
analog/digital audio from the TV.
connection between your DVD player and this unit.
TV
2
Front left channel *
The rear panel illustration
shows jacks and their names to
Center channel COMPONENT
help you find them easily.
Front right channel They are not exactly the same
as the ones on the actual rear
Surround left channel VIDEO OUT
panel of this unit.
Surround right channel
In case you
Connect cables in the following order.
4
Installation is completed.
1 Audio pin cable
(Outputs TV analog audio sounds
2 OSD video pin cable
(Displays the DVD analog video
screen on the TV)
3 Optical cable
(Outputs TV digital audio sounds
y Hint
Check whether the digital audio output of your TV and DVD
player is turned on.
After all connections are complete, plug the power supply cable into the AC
You can enjoy the multi-channel audio from the DVD player and the
Use the video pin cable supplied with your DVD player to make a video
DVD player
1. Pull out the cap
Pull out the cap
before
connecting the
Optical Analog Video
digital audio input Coaxial Video
digital output optical cable,
output output
output
2
R L 2. Check the direction
and then check
1
the direction to
insert the
cable.
Video connection
Subwoofer
1 3 4
FM75
ANTENNA
UNBAL.
Audio connection
SUBWOOFER
COMPONENT COMPONENT
DVD AUX 2
COAXIAL
OPTICAL
TV/STB AUX 1
STB DVD/AUX 2 AUX 1 TV/STB AUX 1
VIDEO IN AUDIO IN DOCK DIGITAL IN
YSP-4000
Do not plug the power supply
cable into an AC wall outlet
until all connections are
To the AC wall outlet
complete.
5
Supplied
4 Digital audio pin cable
from this unit) (Outputs DVD digital audio sounds from this unit)
5 AC power supply cable
and the YSP-4000 menu (Connects this unit to the AC wall outlet)
from this unit)
If you have connected external components,
follow the steps on the backside to start the
AUTO SETUP procedure.
This connection example shows a way to make the most of the capability of this unit.
Connection
enjoy DVD audio and video with higher quality via the HDMI cable.
example 2
a built-in digital satellite tuner, cable TV tuner, or digital airwave tuner, connect a digital satellite
tuner, cable TV tuner, or digital airwave tuner via the HDMI cable. For details, see "Connections
using HDMI cables" on page 22 in the Owner's Manual.
TV
DVD player
HDMI HDMI
INPUT OUTPUT
1 2
(Sold separately)
*
The rear panel illustration
shows jacks and their names to
help you find them easily.
They are not exactly the same
as the ones on the actual rear
panel of this unit.
ANTENNA
AL.
SUBWOOFER
COMPONENT
Subwoofer
DVD/AUX 2 AUX 1 TV/STB AUX 1
VIDEO IN AUDIO IN
Audio connection
Connect cables in the following order.
Supplied
3 AC power supply cable
(Connects this unit to the AC wall outlet)
y Hint
If you connect this unit to an HDMI control-compatible TV (except
some models) via HDMI, you can use the remote control supplied
with your TV to turn on or off the power, select the audio output
component, and adjust the volume level of this unit.
Continued
Note
on the back
Check whether the digital audio output of your TV and DVD player is
turned on.
You can
In case your TV does not have
Digital satellite tuner/Cable TV tuner/
Digital airwave tuner
This connection is not
necessary if your TV has a
built-in digital satellite tuner,
HDMI connection
cable TV tuner, or digital
airwave tuner. Use the optical
cable supplied with this unit to
make an audio connection
between your TV and this unit.
AUX1
For details, see "Connection
(Sold separately) example 1".
DVD
IN
OUT
YSP-4000
HDMI
Do not plug
the power
supply cable
To the AC wall outlet
into an AC wall
outlet until all
connections
3
are complete.
Sold separately
1 HDMI cable
(Displays the DVD digital video and the YSP-4000 menu
screen on the TV)
2 HDMI cable
(Inputs DVD digital audio/video signals to this unit)
If you have connected external components,
follow the steps on the backside to start the
Continued
on the back
AUTO SETUP procedure.
C2007 All rights reserved.