Unpacking And Handling - Fisher & Paykel DCS CPU/CPV-484GG Guide D'installation

UNPACKING AND HANDLING

10
US
CA
CAUTION:
Proper equipment and adequate manpower must be used in moving the cooktop to avoid personal injury or
damage to the unit.
MOVING AND PLACING THE COOKTOP
The cooktops have a shipping weight of approximately 228 pounds (36" models) and 324 pounds (48" models).
After removal of packing materials, it is recommended that the grates and grease drip-pan (some models only)
be removed to facilitate handling. This will reduce the weight to about 150 pounds.
■ DO NOT REMOVE THE GRILL OR GRIDDLE ASSEMBLIES.
It may be necessary to remove the cooktop knobs to pass through some doorways. With the knobs removed a
29-3/8" wide opening is required. Remove the outer carton and packing material from the shipping base. The
cooktop is held to the skid by four straps. After removing the straps, the cooktop must be lifted and removed
from the skid.
■
The professional cooktop should be moved close to its final location. Electric and gas connections should be
made and the backguard installed before the cooktop is placed in its final position.
ANCHORING THE COOKTOP
■ Due to the weight of the cooktop, it is not necessary to anchor the unit to the counter.