Publicité
Les langues disponibles
Les langues disponibles
6.2. Function of Safety Lock：
At any operating state, pull off the safety key, the treadmill stop for emergency, and
all the LCD display "---" the buzzer sound "BI-BI-BI" for alarm. The motor
stops moving. When put up the lock key on the right place, the treadmill enter
the standby, waiting for set up.
(1). Check the load power before exercise; check the validity of the safety lock.
(2). In the course of exercise with the abnormal situation, can pull of the safety
lock to stop the treadmill. Re-place the safety lock to reset and wait for input
command.
(3). Non-professionals are not allowed to dissemble or repair to avoid damage to
the treadmill.
7. MAINTENANCE
7.1 Lubrication
After running for a period of time, the treadmill must be configured with
special cymene silicone oil for lubrication.
Suggestion:
Use less than 3 hours each week
Use 4-7 hours each week
Use more than 8 hours each week
Do not lubricate more than what you need to. Remember: regular and
reasonable lubrication is to improve the lifespan of your treadmill.
7.2 Lubrication method
There is a hole for adding the oil on motor cover. After starting
machine, please change to highest speed, then add the oil into the hole,
the oil will spray from the middle
(see picture)
lubricate once every 5 months
lubricate once every 2 months.
lubricate once every 1 month.
between running belt and board.
- 50 -
Publicité
