sparraw SP-RUN103 Manuel D'utilisation page 40

5. ASSEMBLY
:Step 1:
1. Take out the main frame out from the box
and put it onto the floor, and clear the fittings.
2. use 4pcs M8*20 and 2pcs M8X45 screws
and fix them onto the stand pipe with washers.
Step 3: Use 2pcs ST4X15 screws to fasten
the plastic cover at bottom of stand pipe.
Step 2:
1. Raise the computer panel while
check the signal connection, and
insert 2pcs M8×20 screws with
washers to fasten it.
- 40 -