Setting The Speaker Size; Setting The Speaker Mode - Yamaha DVX-S200 Mode D'emploi

Setting the Speaker Size

Setting the Speaker Mode

DVR-S200 WB56620
POWER
AUDIO ANGLE
/DTS SELECT MATRIX 6.1
REPEAT
NIGHT
SW CENTER
TV INPUT
TV CH
A B C D E
PRESET
h
ON SCREEN
CH
ENTER
STATUS
TV VOL
MUTE
AMP
DVD/CD
VCR
MD/CD-R TUNER
MOVIE MUSIC SPORTS
CINEMA
Advice
• Even if "* FRONT" is set to "SML", when "* BASS" is set to "FRONT", low tones below 90 Hz of the Front L/R channel
signal will output from the Front Speakers.
• If you select a sound field effect when "* SUR." is set to "NON", CinemaStation enters Virtual Cinema DSP mode.
• Settings made in Speaker mode are not reflected when connected to headphones.
Note
• When a sampling digital signal over 48 kHz is input, some settings may not be reflected in the playback sound.
To get the most out of the sound field effects, you need to use all 6 of the
supplied speakers (Front, Center, Surround and Subwoofer). But depending
on your listening objectives, you can turn off specified speakers.
When using any speaker other than YAMAHA Speaker Set NX-P200, you
need to specify the speaker size.
You can specify these settings in Speaker mode.
Specify the speaker to produce no sound by setting
"* CENTER", "* SUR." or "* BASS".
When using other speakers, be sure to set the speaker
size, and depending on your listening objectives set the
POWER
TV
Front Speaker level.
SUBTITLE
STEREO
A-B
SURR
SHIFT
SLEEP
PRESET
MENU
SET MENU
SET MENU
CH
RETURN
TEST
VOLUME
g
AMP
VIDEO 1
VIDEO 2
GAME
Creating the Best Listening Space
Press AMP.
Press SET MENU.
"* Speaker Set" appears.
Press w.
Press h or g to select item you want to set.
Press q or w to change the setting.
Repeat steps 4 and 5 to set the needed item.
When exiting the SET MENU, press SET MENU.
Pressing any one of the DSP Program buttons also exits
the SET MENU.
63