Ottobock 1C66 Triton smart ankle Instructions D'utilisation page 27

The Galileo™ app is connected to the prosthetic foot using Bluetooth. There are 2 modes with
different functional scopes:
• Galileo™ for users
• Galileo™ for orthopaedic technicians
The mode for users makes it possible to control the basic functions of the prosthetic foot (e.g.,
adjusting the heel height, activating the ankle joint, adjusting the toe stiffness, displaying the
charge level, displaying error messages). The mode for technicians has additional expanded set­
ting options which are not accessible to the user.
The mode for users is active after installation. The mode for orthopaedic technicians is activated
by entering the activation code.
INFORMATION
Observe the instructions for use of the Galileo™ app
► The corresponding instructions for use are integrated in the app. You can find them in the
main menu under the Help menu item.
Button functions
Main switch (recessed, black button to the left of the LED)
Function
Turn on prosthetic foot
Turn off prosthetic foot
Erase orthopaedic techni­
cian Bluetooth link
Function
Standby mode on/off
Heel height adjustment
Erase user Bluetooth link
6.2.1 Standby mode
Standby mode can be used to save energy. In standby mode, the prosthetic foot assumes a neut­
ral position and no longer adapts to various conditions. The Bluetooth connection of the prosthet­
ic foot is turned off as well.
► Briefly press the selection key.
Button press
Press briefly
Hold until yellow LED off
Selection key (white button to the right of the LED)
Button press
Press briefly
3 to 5 seconds
Min. 8 seconds
Prosthetic foot feedback
LED flashes green to indicate the
charge level (5 times if complete); 1
brief beep
If the charge level is low, the LED
lights up yellow for 1 second, 1 brief
beep
LED is lit up yellow until the prosthetic
foot is turned off.
When the prosthetic foot is turned off,
the heel height is reset to the value that
the orthopaedic technician set during
the bench alignment.
When it is turned off, the Bluetooth link
of the orthopaedic technician is erased.
Prosthetic foot feedback
Standby on: 1 short beep, LED briefly
flashes yellow
Standby off: 1 short beep, LED
flashes green (1 to 5 times) to indicate
the charge level
1 second beep + 5 short beeps (count­
down)
1 second beep
Ottobock | 27