Ottobock 1C66 Triton smart ankle Instructions D'utilisation page 26

Masquer les pouces Voir aussi pour 1C66 Triton smart ankle:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CAUTION
Using the prosthesis during the charging process
Fall due to connected charging cable
Take the prosthesis off before charging the battery.
Disconnect the prosthesis from the battery charger before putting it on.
INFORMATION
The battery is not fully charged upon delivery. The battery must be charged before the product is
used for the first time.
INFORMATION
If the battery is fully charged, the battery life during normal use is up to 72 h.
Ottobock recommends charging the battery every 48 h.
The charging process takes 2 to 4 h. It can only be performed within the prescribed charging
temperature range.
During the charging process, all functions of the prosthetic foot are deactivated. The Bluetooth
connection remains active.
Assembling the battery charger
1) Connect the appropriate mains plug to the battery charger so it engages.
2) Connect the charging cable with the USB plug to the battery charger.
Charging the battery
>
Only charge the battery when the prosthesis is not being worn. The LED only lights up if the
prosthetic foot is switched on.
1) Open the cover of the charging receptacle and connect the plug of the charging cable to the
charging receptacle (see fig. 1).
→ The LED lights up yellow during the charging process.
The LED lights up green when the charging process is complete.
2) When the charging process is complete, disconnect the plug from the charging receptacle.
→ The LED flashes green in order to indicate the battery charge level (5 times if complete),
and 1 short beep is emitted.
When the charge level is low, the LED lights up yellow for 1 second, and 1 short beep is
emitted.
3) Disconnect the battery charger from the mains network.
6.2 Operation
The prosthetic foot is primarily operated via the Galileo™ app. Only with the app can all functions
be used. There are also two buttons and an LED on the reverse side of the ankle unit. The main
switch turns the prosthetic foot on and off. The selection key provides access to additional func­
tions.
   Main switch
Functions of the app
INFORMATION
The Galileo™ app is available free of charge in the Apple App Store and Google Play Store (see
Page 19).
26 | Ottobock
Reverse side of the ankle unit (see fig. 2)
   LED
   Selection key

Publicité

Table des Matières
loading

Table des Matières