Fisher & Paykel DCS RF195A Guide D'utilisation page 34

Cleaning and caring for your refrigerator
EN
32
To remove trays or fixed bins
For ease of removal, empty food from tray/bin first.
Hold the center front of the tray/bin handle.
Lift vertically to unclip from the runners and pull
tray/bin towards you to remove.
Push both runners back into refrigerator.
Fig.28 Tray removal
To replace trays or fixed bins:
With the runners pushed back into the refrigerator, place the tray/bin on top of the runners.
Push the tray/bin back slowly until you feel it clip back onto the runners.
Important!
Ensure that trays and bins are securely clipped onto the runners before use.
Bin and tray runners are pre-lubricated, and will not need to be re-lubricated during their life. Do
not attempt to clean grease from the runners, as this will affect their ability to function. Do not
immerse runners in water.
Permanently fixed bins and trays
The large freezer bin is permanently fixed. It cannot be removed from the freezer compartment.
To clean simply wipe with a soft, damp cloth.
On holiday / vacation
We recommend you leave your refrigerator running while you are on holiday / vacation.
Switch the ice maker off from the display panel (refer to page 24).
Shut off the water supply to the refrigerator.
On your return, turn on the water supply to the refrigerator.
Dispense 10 qt (10 L) of water and discard to ensure the tank is refilled with fresh water.
Turn on the ice maker (refer to page 24).
Throw away the ice made in the first 12 hours of use.