Activesmart™ Maintenance - Fisher & Paykel DCS RF195A Guide D'utilisation

ActiveSmart™ maintenance
EN
28
Replacement of the interior light (Halogen light bulb)
Turn the power off at the wall socket before replacing the bulb. The light bulb is located on the
top roof of the cabinet at the front.
Remove the lens cover using a small screwdriver. Insert the screwdriver in the front center of the
lens cover and gently lever down. Pull out old bulb.
Do not touch the new bulb with your hand. Leave it in the plastic bag whilst slotting into
position.
Remove plastic bag when bulb is in position.
Replace lens cover.
Turn power on. Light bulb should now glow.
Note: the replacement halogen bulb must not exceed 12 Volt/10 Watt. Bulbs are available from
your DCS Authorized Service Agency or DCS Customer Care Representative.
Fig.21 Halogen light replacement
Important!
Your refrigerator is designed to operate for many years without the need for service checks.
However, if your refrigerator is malfunctioning, have it attended to by your DCS Authorized
Service Agency or DCS Customer Care Representative as soon as possible. All electrical repairs
must be carried out by an adequately trained service technician or qualified electrician.
To find an Authorized Service Center in your area please go to:
www.dcsappliances.com or call 1.888.936.7872