Installing & Setup The Driver - Edirol UM-2 Mode D'emploi

Installing & Setup the Driver
In order to use the UM-2, you must first install the UM-2
driver. The UM-2 Driver is included in the "UM-2 Driver
CD-ROM."
What is UM-2 Driver?
The UM-2 Driver is software which passes data between the
UM-2 and the application (sequencer software etc.) that is
running on the USB-connected computer.
The UM-2 Driver sends data from the application to the UM-
2, and passes data from the UM-2 to the application.
fig.03-00.e
The explanation about installing and setup the driver is
organized according to the computer and MIDI driver that
you are using. Please proceed to the following pages.
Windows XP Users → P.10
Windows 98 / Me Users → P.16
Windows 2000 Users → P.21
Using OMS on the Macintosh → P.27
Using FreeMIDI on the Macintosh → P.31
9