Edirol UM-2 Mode D'emploi page 25

Specifying the Output Destination for MIDI Data
Here you can make settings for using the UM-2 driver with
applications such as the "Media Player" that is included with
Windows.
1
Click the Windows
[Start] button, select
[Settings] from the
menu that appears, and
select [Control Panel].
2
In the Control Panel, double-click the
[Sounds and Multimedia] icon.
3
Click the "Audio" tab,
and in "MIDI Music
Playback," select
"1:EDIROL UM-2 MIDI 1."
MIDI devices correspond to
MIDI ports as follows.
MIDI Output Device
EDIROL UM-2 MIDI 1
EDIROL UM-2 MIDI 2
4
Click [OK].
5
Use a MIDI cable to connect the MIDI OUT 1
connector of the UM-2 to a MIDI sound module.
6
Start up Windows Media Player or Media Player,
select a MIDI file, and play back.
MIDI Output Port
MIDI OUT 1
MIDI O UT 2
Installing & Setup the Driver
If you are using the UM-2
with a sequencer, do not
disconnect the MIDI cable
connected to the UM-2
while a song is playing
back.
Windows Media Player is
located in Start menu ->
Programs-Accessories-
Entertainment-Windows
Media Player.
25