Edirol UM-2 Mode D'emploi page 23

11
Use the USB cable to connect the UM-2 and your
computer.
USB Connector
of your Computer
Computer
12
The "Insert Disk" dialog
box will appear.
Click the "OK" button.
13
The "Files Needed"
dialog box will appear.
In the "Copy files from"
area, input "Q:\WinXP_2K"
and click the "OK" button.
Installation will be
completed.
* Change the drive name Q: to match the drive name of your CD-
ROM drive. For example if your CD-ROM drive is named D:, you
would input "D:\WinXP_2K".
14
The "Found New
Hardware Wizard" will
appear.
Make sure that "EDIROL
UM-2" is displayed, and
click the "Finish" button.
USB Cable
Installing & Setup the Driver
UM-2
To prevent malfunction
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
MIDI Cable
devices before making any
connections.
23