Edirol UM-2 Mode D'emploi page 28

Installing & Setup the Driver
4
When installation is
completed, the following
dialog box will appear.
Click [Restart] to restart
your Macintosh.
OMS settings
* If other MIDI devices are connected, you must turn off the power on
all devices, and then make OMS settings according to the following
procedure.
1
Use the USB cable to connect the UM-2 and your
computer.
USB Connector
of your Computer
Computer
2
In the "Opcode" folder in the location
where OMS is installed, open the "OMS
Applications" folder, and double-click the
"OMS Setup" icon.
3
If the "Apple Talk"
dialog box appears, click
[Turn It Off].
Then, in the dialog box that
appears next, click [OK].
28
USB Cable
If you are using the UM-2
with a sequencer, do not
UM-2
disconnect the MIDI cable
connected to the UM-2
while a song is playing
back.
MIDI Cable