Edirol UM-2 Mode D'emploi page 33

5
In the dialog box that
appears, select the MIDI
equipment that is
connected to each port of
the UM-2, and click
[>>Add>>].
Manufacturer:
Select the manufacturer of your MIDI equipment. If the
appropriate manufacturer does not appear in the list, select
"Other."
Model:
Select the model of your MIDI equipment. If the appropriate
model does not appear in the list, select "Other."
Studio Location:
Select "UM-2," and for "Cable" that appears below it, select
the port to which your MIDI equipment is connected.
6
If two units of MIDI equipment are connect, repeat
step 5.
7
When settings are
complete, click [Done].
A setting window like the
following will appear.
8
If you selected "Other" for Model, double-click the
appropriate icon in the setting window to make
settings for your MIDI equipment.
(For details refer to the documentation included with your
software.)
9
From the File menu,
select [Save], and save
your settings.
This completes driver settings.
Installing & Setup the Driver
This is one example of a
setting window. The
window that appears will
depend on your setup.
33