Edirol UM-2 Mode D'emploi page 22

Installing & Setup the Driver
6
Click the "OK" button to close "System Properties."
7
Insert the UM-2 Driver CD-ROM into the CD-ROM
drive.
8
From the Windows Start
menu, select "Run."
9
In the "Open" field of
the dialog box that
appears, enter
"Q:\WinXP_2K\Setupinf.ex
e" and click [OK].
* Enter the drive name Q: appropriate for the drive name of your CD-
ROM drive.
10
The SETUPINF dialog
box will appear, and the
display will indicate
"Ready to install the
driver.–"
22
Q
To check the drive name of
your CD-ROM drive,
double-click the My
Computer icon.
If the "Ready to install the
driver.---" dialog box does
not appear, go to the UM-2
Driver CD-ROM folder
named WinXP_2K, open
the Reademe_e.htm file,
and read the section entitled
"Installation."
If the display indicates "The
driver is already installed.–",
you can connect the UM-2's
USB cable to the computer and
use it.
If the display indicates "The
driver was not deleted
completely.–", refer to
Deleting the UM-2 Driver
(p. 26) to re-install it.