Edirol UM-2 Mode D'emploi page 17

6
The SETUPINF dialog
box will appear, and the
display will indicate
"Ready to install the
driver.–"
7
Use the USB cable to connect the UM-2 and your
computer.
USB Connector
of your Computer
Computer
8
In some cases, the
"Insert Disk" dialog box
may appear.
Click "OK."
9
The "New Hardware
Found" dialog box will
appear.
In the "Copy files from"
area, input "Q:\Win98_Me"
and click the "OK" button.
Installation will be completed.
* Change the drive name Q: to match the drive name of your CD-
ROM drive. For example if your CD-ROM drive is named D:, you
would input "D:\Win98_Me".
Q:\WIN98_ME
USB Cable
Installing & Setup the Driver
If the "Ready to install the
driver.---" dialog box does
not appear, go to the UM-2
Driver CD-ROM folder
named Win98_Me, open the
Reademe_e.htm file, and
read the section entitled
"Installation."
If the display indicates "The
driver is already installed.–",
you can connect the UM-2's
USB cable to the computer and
use it.
If the display indicates "The
driver was not deleted
UM-2
completely.–", refer to
Deleting the UM-2 Driver
(p. 26) to re-install it.
MIDI Cable
To prevent malfunction
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
17