Sony Handycam HDR-TD20 Mode D'emploi page 52

4
Select the desired operation
when the highlight playback
finishes.
A : The camcorder plays the Highlight
Playback scenes again.
B : You can save the Highlight
Playback scenes in standard definition
image quality (STD).
C : You can change the settings for
Highlight Playback.
To change the settings for Highlight
Playback
You can change the Highlight Playback
settings by selecting [Highlight Setting]
on the screen after Highlight Playback has
finished.
You can also change the setting by selecting
while the camcorder is playing highlight
scenes.
[Playback Range]

You can set the playback range (starting and
ending date) of the Highlight Playback.
[Theme]

You can select a theme for Highlight Playback.
[Music]

You can select music.
[Audio mix]

The original sound is played back with the
music.
[Length]

You can set the length of the Highlight Playback
segment.
US

[Highlight Point]

You can set the points in a movie or photo that
will be used in a Highlight Playback. Play the
desired movie, and select
play the desired photo and select
appears on the movie or photo that is used in a
Highlight Playback.
To erase the points, select
Points].
Notes
Highlight Playback scenes will change each time

you select a Highlight Playback.
The [Playback Range] setting is cleared when

the Highlight Playback stops.
After the music file is transferred to the

camcorder, if you cannot play the music,
the music file may be damaged. Delete the
music file by selecting
Playback Settings]  [Empty Music], then
[
transfer the music file again. You can restore the
music data recorded on your camcorder at the
default using "Music Transfer. " For operating
instructions, see "Music Transfer" help.
If the Highlight Playback function was started

from the Map View screen, [Highlight Point]
cannot be set. However, if the Highlight
Playback function was started from the Event
View screen and you set the [Highlight Point],
the point can take effect on the Map View also
(HDR-TD20V).
The audio used for the Highlight Playback will

be converted to 2ch stereo.
When you connect the camcorder to an

external device, such as a TV, and watch
Highlight Playback or Highlight Scenario, these
images do not appear on the LCD screen of the
camcorder.

Adding your desired music: "Music Transfer"

(p. 63)

. Or
.
 [Clear All
 [Setup] 