Sound Controls; Equalizer; P.bass Control; Bass/Treble Control - Pioneer X-CM52BT-K Mode D'emploi

04 Getting started

Sound controls

Equalizer

When the
EQUALIZER
will be displayed. To change to a different mode, press the
repeatedly until the desired sound mode appears.
EQUALIZER
FLAT
ACTIVE
DIALOGUE
NIGHT

P.bass control

When the power is first turned on, the unit will enter the
P.bass mode which emphasises the bass frequencies. To
cancel the P.bass mode, press the
control.

Bass/treble control

Press the
BASS/TREBLE
bass or treble.
Note
• The and
EQUALIZER
simultaneously. The most recently selected of these two
functions will be the one used.
• can operate alongside either the
BASS/TREBLE
or
EQUALIZER P.BASS
When one of the above two functions is
selected, the function that is not selected will
be displayed as follows.
1 When P.BASS setting (ON/OFF) is changed
• : FLAT
EQUALIZER
2 When EQUALIZER setting is changed
• : OFF
P.BASS
16
En
is pressed, the current mode setting
A flat and basic sound
A powerful sound that
emphasizes low and high tones
A sound that allows the radio or
vocals to be heard more easily
A sound that can be enjoyed
at night even with lower volume
on the remote
P.BASS
, then press to adjust the
cannot operate
P.BASS
.

Setting the wake-up timer

Used to change the existing timer setting, or to set a new
timer.
1 Press STANDBY/ON to turn the power on.
2 Press and hold CLOCK/TIMER.
3 Press to select "ONCE" or "DAILY",
then press ENTER.
ONCE – Once timer play works for one time only at a
preset time.
DAILY – Daily timer play works at the same preset time
and days of week.
4 Press to select "TIMER SET", then
press ENTER.
5 Press to select the timer playback
source, then press ENTER.
, , ,
DVD / CD FM USB/IPOD BT AUDIO
selected as the playback source.
6 Press to select the timer day, then
press ENTER.
7 Press to set the hour, then press
ENTER.
8 Press to set the minute, then press
ENTER.
Set the time to finish as in steps 7 and 8 above.
9 Adjust the volume press
press ENTER.
10 Press STANDBY/ON to enter the power
standby mode.
The indicator lights up.
TIMER
, and can be
AUDIO IN LINE
, then
VOLUME +/–