Simplified Remote Control - Yamaha HTR-6295 Mode D'emploi

Part names and functions

Simplified remote control

Use the supplied simplified remote control to make basic controls of this unit. Keys on the simplified remote control
function as well as the identical keys on the main remote control (page 6).
Note
• Before using the simplified remote control or replacing the battery, make sure that you read "Notes on remote controls and batteries" in the "Caution"
section.
SLEEP
BD
DVD
ON SCREEN
ENTER
RETURN
TAG
Remove the insulation sheet
y
• To select an input source, press INPUT l / h repeatedly.
• The printings "TAG" and "PRG SELECT" are not used for this model.
■
Setting the controlling zone
Follow the procedure below to select an amplifier (main,
Zone2 or Zone3) to be operated by the simplified remote
control (page 58).
Zone to select
Press and hold h (right of ENTER) and
Main
BD/DVD for more than 3 seconds.
Press and hold h (right of ENTER) and TV
Zone2
for more than 3 seconds.
Press and hold h (right of ENTER) and CD
Zone3
for more than 3 seconds.
■
Setting the remote control ID
Follow the procedure below to set the remote control ID of
the simplified remote control. For details about remote
control ID, see page 61.
Zone to select
Press and hold l (left of ENTER) and BD/
ID1
DVD for more than 3 seconds.
Press and hold l (left of ENTER) and TV
ID2
for more than 3 seconds.
8
En
POWER
SCENE
TV CD RADIO
INPUT
OPTION VOLUME
MUTE
DISPLAY
PRG SELECT
PRESET
Procedure
Procedure
■
Replacing the battery of the simplified
remote control
Change the battery when the operation range of the
simplified remote control decreases.
Use a straight Replace the
pin to remove battery with a
the cover. new CR2025
battery.
Close the
cover.