Yamaha HTR-6295 Mode D'emploi page 21

y
• Input jacks in parentheses indicate the jacks to which the SCENE function (page 24) is assigned by the initial factory settings. To use the SCENE function
with the initial factory settings, connect external components that support the SCENE function to these jacks.
• You can change the name of the input source displayed on the front panel display as necessary (page 51).
• See page 56 on how to use the ZONE2/3 OUT jacks.
• You can select the video to be output when "AUDIO1" or "AUDIO2" is selected as the input source or assign another video input jack to "AV3" or "AV4"
(page 43). In case the default combinations of the audio/video input jacks on this unit do not correspond to your external component, change the video
input jack assignments according to your external component.
■
Audio player
External component
External component with optical digital
output
External component with coaxial digital
output
External component with analog audio
output
Turntable
y
• If your CD player has a coaxial digital output jack, connect it to the AV3 jack of this unit. In this case, you can use the SCENE function (page 24) with the
initial factory settings.
• When connecting a turntable with a low-output MC cartridge to the PHONO jacks, use an in-line boosting transformer or MC-head amplifier.
• Connect your turntable to the GND terminal of this unit to reduce noise in the signal.
About audio/video output jacks
When using the AV OUT jacks: connect these jacks to composite video and analog audio input jacks of an external
component.
When using the AUDIO OUT jacks: connect these jacks to analog audio input jacks of an external component.
When using the DIGITAL AUDIO (OPTICAL OUT) jack: connect this jack to optical digital input jack of an
external component.
■
Internal signal flow
Video signal flow
This unit automatically converts input video signals and
outputs the signals to the HDMI OUT jacks and
MONITOR OUT (COMPONENT VIDEO and VIDEO)
jacks (video conversion).
Note
• The AV OUT (composite video) jack only outputs video signals input to
the composite video input jacks.
Input
HDMI
HDMI
P
R
Component
P
video B
Y
VIDEO
Composite
video
Output jacks on
components
Optical digital output AV 1 (TV)
AV 4
Coaxial digital output AV 2
AV 3 (CD)
Analog audio output AV 5
AV 6
AUDIO 1
AUDIO 2
Analog audio output PHONO
Audio signal flow
Notes
• Audio signals input to the HDMI input jacks are output from either the
speaker terminals or HDMI OUT 1/2 jacks depending on the "Audio
Output" setting (page 49).
• The DIGITAL AUDIO (OPTICAL OUT) jack outputs digital audio
signals only when signals are input to the optical or coaxial optical input
jacks and corresponding input source is selected.
Output
HDMI
HDMI OUT
Optical
digital
P
R
Coaxial
P
B
digital
Y
VIDEO
Analog
Input jacks on this unit
OPTICAL
OPTICAL
COAXIAL
COAXIAL
Analog audio
Analog audio
Analog audio
Analog audio
Analog audio
Input
HDMI
OPTICAL
COAXIAL
MULTI CH INPUT
Connections
Output
HDMI OUT
OUT
OPTICAL
Speaker
terminals
17
En