Sony STR-DA3200ES Mode D'emploi page 112

Program the sequence of the
operation
1,5
2,3
1
Press MACRO 1 or MACRO 2 for
more than 1 second while
pressing RM SET UP.
The RM SET UP button flashes twice.
2
Press the input button of the
component that you want to
assign one of the following
operations.
The selected input button lights up.
112
GB
3
Press the button for the
operation you want to perform
to learn the function as follows.
Press
H, x, X,
M, m,
., >
The input
button for more
than 1 second
MACRO 1 or
MACRO 2
The input button selected in step 2 flashes
twice, then lights up again.
4
Repeat steps 2 and 3. When you
want to assign another
command for the same
3
component, repeat step 3.
5
Press RM SET UP to finish the
programming process.
Tip
If the RM SET UP button flashes five times in step
1,3
1, and the macro programming process does not
start, replace the batteries with new ones.
To cancel programming
Press RM SET UP. Also, not pressing any
button for 60 seconds cancels the settings.
The previous command remains valid.
Operations to be
programmed
Performs the operation
of the button.
Switches inputs.
Make a one second
interval. When you want
to make a longer
interval, press MACRO
1 or MACRO 2
repeatedly.