Pioneer DVJ-1000 Mode D'emploi page 15

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
19. JOG MODE select button
Each time pressed, sets VINYL mode alternately ON/OFF.
VINYL mode ON: If surface of jog dial is touched during playback,
playback stops, and if the dial is then rotated, image and sound are
output in response to the amount of rotation. (if the angled surface
of the jog dial is rotated without touching the top, pitch bend opera-
tion is enabled.)
¶ The current jog mode is memorized even when power is turned
off.
VINYL mode OFF: The above operations are disabled even when
the jog dial's surface is touched.
20. VINYL mode indicator
Lights when the jog mode is set to VINYL mode.
21. TEMPO control range select button
Each time this button is pressed, the TEMPO control slider's vari-
able range changes (±6 %, ±10 %, ±16 %, WIDE).
When WIDE is selected, the variable range during DVD and MP3 play-
back is set to +70 % to –100 %, and during CD playback, ±100 %.
22. TEMPO control range indicator (±6, ±10, ±16, WIDE)
¶ When control range is set to ±6 %, the ±6 indicator lights.
¶ When control range is set to ±10 %, the ±6 and ±10 indicators
light.
¶ When control range is set to ±16 %, the ±6, ±10 and ±16 indica-
tors light.
¶ When control range is set to WIDE, the ±6, ±10, ±16 and WIDE
indicators light.
23. MASTER TEMPO button/indicator
Each time this button is pressed, the master tempo function turns
alternately ON/OFF.
24. TEMPO control slider
When pulled forward (+), playback tempo is accelerated, and when
pushed away (–), tempo is slowed.
25. TEMPO RESET indicator
When lighted, indicates that the playback tempo is set to normal
tempo "0", regardless of the position of the TEMPO control slider.
26. TEMPO RESET button
Pressing this button instantly resets the playback tempo to "0" (nor-
mal tempo), regardless of the current position of the TEMPO control
slider. Press the button once again to cancel the reset.
27. Jog dial display
P.11
28. Jog dial (+FWD/–REV)
29. Disc loading slot
P.31
30. Forced eject hole
P.31
31. Memory card door and slot
32. Memory card indicator
This indicator lights with a memory card is loaded and the door is
closed, and flashes during memory card access.
¶ Do not open the door or turn off power while the indicator is flash-
ing.
33. PLAY/PAUSE indicator
Lights during playback, and flashes during pause mode.
34. PLAY/PAUSE (3/8) button
35. CUE indicator
P.36
Lights to indicate a cue point has been set. Flashes during pause
mode.
36. CUE button
P.36
Cue point setting
Back cue
Cue point sampler
37. Manual search buttons (REV1/FWD¡)
38. Track search buttons
(PREVIOUS 4/NEXT ¢)
Use to return/advance playback by track (during CD, MP3) or chapter
(during DVD).
During DVD playback, use to return to menu page or change page.
39. REV indicator
Lights when DIRECTION FWD/REV select switch is set to reverse.
40. DIRECTION FWD/REV select switch
Set to REV position for reverse playback.
41. HOT CUE REC MODE button
Press to select the HOT CUE button's function (record/call).
¶ Defaults to call mode when power is switched on.
P.37
P.37
P.43
P.43
P.33
P.34
P.35
P.39
Before Operating (Names and Functions of Parts)
Before Operating (Names and Functions of Parts)
42. HOT CUE (A, B, C) buttons/indicators
A, B, or C indicator lights red to indicate hot cue point record mode.
A, B, or C indicator lights green for hot cue point, and orange for hot
loop point; when an indicator is lighted, call mode is enabled for that
point; pressing the button initiates playback from the hot cue point.
When indicator is not lighted, no hot cue point is recorded.
43. Title/folder search buttons
(DVD TITLE/MP3 FOLDER |/\)
During DVD playback, titles are forwarded or reversed in the direc-
tion corresponding to the button pressed.
During MP3 playback, goes in designated direction for folders in lay-
ered CD or DVD.
44. TEXT MODE select button
Each time this button is pressed, the display alternates between
WAVE and TEXT (track name/album name/artist name).
45. TIME MODE/AUTO CUE button
TIME MODE:
Each time the button is pressed, the time display switches alter-
nately between playback elapsed time and remaining time (REMAIN).
In the case of MP3, the remaining playtime (REMAIN) may not im-
mediately be displayed, depending on the file.
¶ The time mode remains set in memory even when power is turned
off.
AUTO CUE:
Hold depressed for one second or more to set/release the auto cue
function.
Hold depressed for five seconds or more to switch the auto cue
level ( P.33).
¶ The auto cue ON/OFF setting and auto cue level remains set in
memory even when power is turned off.
46. ANGLE button
Press to change the viewing angle during DVD playback (on sup-
ported discs only).
¶ In DJ mode, when the angle is changed both video and audio
playback temporarily stop (due to writing to buffer memory).
47. SUBTITLE button
During DVD playback, press to alternately turn subtitle display ON/
OFF (on supported discs only).
¶ This function is disabled in DJ mode.
48. AUDIO button
During DVD playback, press this button to change language or audio
channel (on supported discs only).
¶ In DJ mode, when the language/audio channel is changed, both
video and audio playback temporarily stop (due to writing to buffer
memory).
49. Display
P.10 (1 to 24)
50. DISPLAY button
P.42
When pressed in DJ mode, turns the hot cue, cue point, and play-
back time guide display ON/OFF on the monitor connected to the
preview video output connector.
When pressed in NORMAL mode, turns the disc information guide
display ON/OFF.
¶ When power is switched ON, the display function defaults to ON
when the unit is in the DJ mode, and OFF (no display) in the NOR-
MAL mode.
51. DELETE button
P.46
Press to delete cue points and loop points recorded in memory card.
52. MEMORY button
Press to store cue points or loop points in memory card.
53. MENU button
Press to display DVD menu.
Also, during MP3 playback, displays MP3 navigator screen. ( P.42)
54. Top menu (T.MENU) button
Press to display a DVD's top menu level.
55. SETUP button
P.17
Press to display the setup menu.
56. RETURN button
When setup or other menus are displayed, press this button to re-
turn to the previous menu or item.
P.39
P.35
P.38
P.43
<DRB1414> En
9

Publicité

Table des Matières
loading

Table des Matières