Sunsoft Solaris; Tape Drive Installation - Tandberg Data SLR Serie Manuel D'installation Et Guide De L'utilisateur

Tandberg SLR Installation and User's Guide

Sunsoft Solaris

Tape Drive Installation

1) Install the SLR Tape Drive.
2) Turn on the SUN workstation or server.
3) Use
Boot –r .
This will reconfigure the
properly on the machine.
For improved performance using the SLR24, SLR7, SLR40, SLR50,
SLR60, SLR75, SLR100 and SLR140, a specific system file can be
modified:
/kernel/drv/st.conf
ST.CONF File entries for Tandberg SLR24, SLR7, SLR40,
SLR50, SLR60, SLR75, SLR100 and SLR140:
"TANDBERGSLR6","Tandberg SLR24","TANDBERG",
"TANDBERGMLR3","Tandberg SLR50","TANDBERG",
"TANDBERGSLR7","Tandberg SLR7","TANDBERG",
"TANDBERGSLR40","Tandberg SLR40","TANDBERG",
"TANDBERGSLR60","Tandberg SLR60","TANDBERG",
"TANDBERGSLR75","Tandberg SLR60","TANDBERG",
"TANDBERGSLR100","Tandberg SLR100","TANDBERG",
"TANDBERGSLR140","Tandberg SLR140","TANDBERG",
TANDBERG = 1,0x37,0,0x963b,1,0,0;
NOTE:
Updated configuration file (ST.CONF) can be downloaded from the Tandberg
WEB at www.tandberg.com. Please refer to the Readme provided with the file
for more information on the installation process.
directory for the SLR to work
/devices
Tandberg Data
61