Tape Drive Operation - Tandberg Data SLR Serie Manuel D'installation Et Guide De L'utilisateur

Tandberg SLR Installation and User's Guide

Tape Drive Operation

Loading a Data Cartridge
Tandberg SLR2 ® SLR5
1) Press the
Eject
location).
2) Ensure that the data cartridge is correctly oriented (see left
for
button (see detail upper right for button
orientation).
3) Push the data cartridge Into the
drive until you hear a click that
indicates that the data cartridge is
locked in place.
Tandberg SLR24, SLR7,
SLR40, SLR50, SLR60,
SLR75, SLR100 and SLR140
1) Ensure that the data cartridge is
correctly oriented (see left for
tape orientation).
2) Push the data cartridge into the
drive slowly until it is taken in by
the tape drive automatically.
Tandberg Data
tape
21