Novell Netware; Host Adapter; Backup Applications - Tandberg Data SLR Serie Manuel D'installation Et Guide De L'utilisateur

Tandberg SLR Installation and User's Guide

Novell NetWare

Host Adapter

Novell NetWare includes the necessary drivers for most SCSI
host adapters.
If the appropriate driver cannot be found, please refer to the
installation guide provided with the SCSI host adapter.
Most of the Backup applications on Novell NetWare require
the use of the Advanced SCSI Programming Interface (ASPI).
The ASPI driver (ASPITRAN.LNM on Novell 4.1x and
NWASPI.CDM on Novell 4.x and 5) is part of the Operating
System and is normally automatically installed when the SCSI
board is setup on your system.
If you have any problem to install the SCSI host adapter or
install the ASPI compatible driver on this operating system,
please refer to the installation guide provided with the SCSI
host adapter.

Backup Applications

NetWare Embedded Backup Applet on
Novell 4.1x
Installation
On the Server console, type:
LOAD TAPEDAI
SCAN FOR NEW DEVICES*
LIST DEVICES (The SLR appears on screen.)
LOAD TSA410**
LOAD SBACKUP
* When this command is executed, you may see the
following warning:
Tandberg Data
45